• Easy to install • No tank required • Heats water on demand • Very precise regulation • It pays for itself on electricity savings • Saves space • Safer than conventional units Similar (but inferior) products will cost anywhere from $410 to over $800 Our Titan Tankless Water Heaters incorporate new space age technology and feature a faster and more accurate temperature sampling system, a manual resetable thermostat and a new air/water deferential analyzing system to prevent dry starts, (which is a key problem for other tankless systems.) By heating water only as it is needed our Tankless Water Heater eliminates the need for bulky water heaters that heat water continuously. This can reduce hot water costs up to 60% over conventional electric water heaters. TheTankless Water Heater's high efficiency is in part due to its dedicated analog microprocessor that samples input and output temperatures 21 times per second. This power control system analyzes the data and manages power usage for maximum efficiency and temperature stability. At rest, the Tankless Water Heater uses no power at all.

Special Only $245.00 (MSRP $349.95)

Available in seven models, our Tanless Water Heaters are ideal for a wide range of application. One single unit can supply the hot water needs of your home, condo or apartment.. Electricty savings in some applications can pay back unit cost in less than one year.

Due to its shielded incoloy heating elements and copper & brass casing, our Tankless Water Heaters are ideal in any application where mineral deposits shorten the life of a conventional water heater.

Our Tankless Water Heaters come with a 15 year warranty on all water-carrying components and all other parts are warrantied for one year. Installation is quick and easy, requiring no venting or pressure relief valves, and the compact size allows installation almost anywhere. Our Heaters without a doubt are the Tankless Water Heaters for the 21st century.

U.S. Patent # 5,408,578

Note that the KW and Amps are controlled by the setting on the Power Mode.

Check specifications on unit used. Voltage, amperage, breaker and wire may vary depending on local electrical standards. Consult a professional plumber and electrician for guidance.

The electrical specifications are based on 220 volts. It should be noted that higher voltage will increase power, just as lower voltage will have the reverse effect. The (POWER MODE CONTROL) can be adjusted to compensate allowing the user to increase or decrease water temperature. For best performance adjust temperature at MEDIUM FLOW (approximately 1 GPM) this is the average water flow at any faucet with an aerator.

Remember, that any adjustments made on your unit will take seconds to reach point of use. DO NOT OVER HEAT WATER. Water temperature from 105F to 120F is adequate for all practical purposes

* N-10 uses 110 volts and will supply only warm water
.In areas with cold weather we recommend to use the highest model.

USES

• House • Apartments • Condominiums • Beauty Salons • Hospitals • Boats • Laboratories • Campers • Offices
• Schools • Cottages • Restaurants • Barber Shops • Warehouses • Anywhere hot water is needed.

Click here for the Frequently Asked Questions about this product

Hot Water Energy Conservation

Heating water accounts for up to 25% of the average household energy. A leak of one drip per second can cost you $1.00 per month, 2 drips $2.00 and so on... Installing aerators in faucets and low flow shower heads can save a significant amount of hot water.

Demand Water Heaters
One way to save on domestic hot water bills is to use (DEMAND TYPE WATER HEATER). A conventional hot water system heats water in a tank to a specified temperature. As heat is lost from the tank, the water is reheated until it reaches the specified temperature again. For most of the day the water in the tank is not used, but it loses heat continually. DEMAND WATER HEATERS Eliminate this problem by heating water only as hot water is drawn.

Facts: A 30 or 40 gallon hot water heater tank will supply only enough hot water for one or two showers before running out of hot water! Not with Titan Electronic Tankless Water Heater!

IT IS EASY TO SEE WHY CONVENTIONAL WATER HEATERS ARE NO LONGER ECONOMICAL OR PRACTICAL... They consume electricity to heat water that is not being used, a process that repeats itself over and over even though no hot water is needed.

Our Electronic Instant Water Heaters provide hot water ONLY when you need it, without the costly reheating process. An electronic component monitors the temperature of the water at different flow rates and maintains a pre-set temperature, allowing the use of conventional or single handle faucets.

We reserve the right to amend specifications as new technology develops.